CDMA 450 Fixed Wireless Terminal

MODEL: FWT-C450

Photo of CDMA 450 Fixed Wireless Terminal

The CDMA Fixed Wireles Terminal is designed to provide a flexible and cost-effective solution of communication in the places where CDMA network is more accessible than PSTN, e.g. trains, ships, exhibitions, temporary sites, offices, etc. If connecting a metering device, it is also a good solution for PCOs (public call offices) to reduce phone call costs via wireless network.

With high receiving sensitivity and interference resistance, the terminal can provide reliable service like a PSTN (fixed-line) phone. It is an ideal choice for the CDMA network carrier to maximize the subscriber base and network usage.

See the overview of CDMA450MHz Terminal here.

How to Buy Our Products

Related Links

Functions

Specifications

Functions

  • Compliant with IS2000 and IS95A/B standards;
  • Capable to make calls if connecting to a standard phone;
  • Support R-UIM and ROM-only R-UIM;
  • Generate exact polarity reversal signal for metering device to start/end charging a cal;
  • Front panel with LCD indicating the clock, phone number, signal strength and call duration;
  • Support PABX connectivity;
  • Support UIM card locking (terminal refuses to take any other UIM card except the one set to be accepted) and encrypting UIM card with PIN code automatically;
  • Fast installation without complex configuration;
  • Stable and reliable performance with wireless module for industrial application;
  • Suitable for call termination of ISP;
  • Provided with reminder for incoming calls.

Specifications - Wireless Module

Working Frequency Tx: 453 ~ 456 MHz / Rx: 463 ~ 466 MHz
Air Interface CDMA 2000 1x RTT
Sensitivity -104dBm
Channel Bandwidth 1.23 MHz

Specifications - Environmental

Operating Temperature 0°C ~ +40°C
Relative Humidity 45% ~ 90%
Noise ≤60 dB(A)
Atmosphere Pressure 86 ~ 106 kPa

Specifications - Electrical

Power Supply AC 220V±10% 47~54 Hz / 110V 60Hz (optional) / DC12V (optional)
Peak Power Consumption 2W
Antenna Gain 3.5dB (omni-directional) / 12dB (directional)

Specifications - Structural

Housing Material ABS plastic
Connectors Antenna (SMA , TNC-type is optional), 2 RJ11 ports, 1 USB port
Dimensions 192mm X 138mm X 40mm
Weight 0.4 kg